Deckel NC Milling Machine Web Site

Subtitle

Other Controls

Deckel offered several other controls and some only in certain countries:

 

Siemens 3M  -                rarer then Dialog or Contour controls in Deckel machines, but not super rare. No board level

                                      documentation. Probably a leftover from a Siemens cooperation with GE/Fanuc.

                                      The author of these pages is parting out an FP3NC with a Siemens 3M control. More on that here:

                                      http://www.dialog5.com/partingasiemens3mmachine.htm 

Heidenhain TNC 355  -  very rare in Deckel machines and they were very expensive when new. Came to market late.

Dynapath 20  -               most likely only for the USA. An attempt to tailor to the US market.

Hurco  -                         only in the USA. A side effect of the US experiments that went bad (see history section).




 

 

A machine with a very early Siemens CNC 3M:

 


 

 

It appears that for a short time a replacement was planned for the Siemens 3M, which would have been called the CNC 880:


TNC 355
-------
Bedienpult komplett 3 Teile...................    6006 xx 008000 00
Blechgeh„use..................................            6400 03 002290 00
Bildschirmeinheit 12 Zoll..BE 412.............6006 xx 008001 00
NC Bedientafel.............TE 355.............    6006 xx 008002 00
Maschinenbedientafel (Achsrichtungen).........6006 xx 008003 00
Logikeinheit 1 ............LE 355.............        6006 xx 008020 00
Logikeinheit 2 ..(LE 355 + PL 300)............6006 xx 008023 00
PLC Erweiterung ...........PL 300.............    6006 xx 008021 00
Stromversorgung...............................        6006 xx 008030 00
Regelkreis (Ident.Nr.23828901)................6006 xx 008031 00
Regelkreis (Ident.Nr.24982301)................6006 xx 008031 01
Rechner    (Ident.Nr.23793001)................6006 xx 008032 00
Rechner    (Ident.Nr.24965201)................6006 xx 008032 01
Elektronisches Handrad HR 250.................6006 xx 008025 00